Kemet offer the finest in aqueous biodegradable cleaning fluids. These are specialist formulated concentrated detergents available in neutral, alkaline and acid types. The detergents work in two ways:-

• Reduces surface tension and intensifies ultrasonic cavitation

• Dissolves and binds the dirt which has been loosened by the ultrasonics.

All cleaning detergents are provided with a detailed technical specification sheet and MSDS

Type A9 - General purpose, lightly alkaline detergent suitable for all metals. Available in 5Kg, 20kg and 210Kg containers

Type A - General purpose, alkaline detergent suitable for all steels. Available in 1, 5 and 25 Litre containers.

Type O2 - General purpose, alkaline detergent suitable for all steels. Available in 5Kg, 20Kg and 210Kg containers.

Type H14 - Strong alkaline detergent suitable for mould cleaning, carbon removal and on steels, glass / ceramics. Available in 5Kg, 20Kg and 210Kg containers.

Type N - General purpose neutral detergent suitable for all materials including plastic. Available in 1 and 30 Litre containers.

Type I - Acidic detergent suitable for rust and oxide removal on all materials. Restores white ceramics. Available in 5Kg, 20Kg and 210Kg.

M99 - Dewatering solutions which removes water moisture and protects. Available in 20Kg containers.

Solvent Fluid Type C100 - is a solvent cleaner than rather aqueous detergent. It has a high flash point (108 degrees C) and evaporates very slowly. It effective on removing/softening glue/paint residues from areas such as spray nozzles. Available in 20 Kg.

To download a datasheet on Kemet ultrasonic cleaning fluids, click here.

For further advice on which cleaning solution to use, contact the sales desk.

A cleaning and degreasing fluid with many of the performance characteristics of 1.1.1 Trichloroethane, but without the ozone depleting properties.

Effectiveness
CO-42 cuts through contamination such as lapping and polishing residue, grease, oils and general surface contamination.

Evaporation
CO-42 is relatively quick drying, but not so fast as to leave dried staining on the surfaces of products. The controlled wetting and evaporation properties of CO-42 make it extremely versatile and efficient.

Versatility
Able to act as an extremely efficient cleaning agent for all metals, most plastics, ceramics, glass and similar materials.

Kemet C70 is a solvent cleaning and degreasing fluid with all of the characteristics needed to remove grease, oil and residues from parts. It is supplied in a pressurised container complete with detachable extended spray tube for reaching into the most difficult areas.

Features

• Highly efficient degreasing solvent
• Very fast evaporation rate
• No staining
• Instantly removes lapping and polishing residue
• Cost effective
• Versatile and can be used on all metals, ceramics etc. (Always test small area first)
• Contains no ozone depleting substances